Product use:
◆ Stretch molding machine out of the cloth area
◆ Spray plate uniform humidification device humidified in the fabric area of the tenter setting machine, it can be used to make the fabric evenly and quickly reach the required moisture recovery and cooling.
◆ The feed area of the tension pre-shrunk
◆ By applying a certain amount of liquid in the cloth area of the preshrink machine, the cloth can get a stable moisture content at the fastest speed, thereby improving the shrinkage effect of the cloth. Directly speaking, it can greatly improve production efficiency.
◆ Dryer out cloth area
◆ Through a certain amount of wetting can make the cloth surface temperature quickly reduced to 60 degrees Celsius, to avoid the production of macular phenomenon.
Product features:
◆ Spray disc humidification system can spray water or liquid evenly and quantitatively on the fabric.
◆ Uniform weft, no contact feed, no droplet and water trace formation.
◆ The amount of liquid is adjusted accurately with the change of cloth speed to ensure the same amount of liquid before and after and even warp direction.
◆ No tension treatment fabric, will not change the fabric structure.
◆ Easy installation, small footprint, long service life.
Technical parameter:
◆ The droplets sprayed by the constant rotating speed spray disc are extremely fine, with the size of the droplets ranging from 30-70 microns.
◆ A spray tray to give liquid or water, per meter of fabric door width, 15-300 ml per minute.
◆ Working width: 1000-28000mm